Labgear PSUFC Power Supply, Mains Plug; Fully Screened 12VOLT 300MA

An ultra compact replacement power supply for masthead amplifiers and remote line powered distribution amplifiers.
SKU: PXPSUFC

Availability: In stock

£14.95
Labgear

Same day dispatch available if ordered before 2pm.

Call us now for more info about our products.

Straightforward return and warranty policy

Free mainland UK shipping for orders over £10

 

Description

Details

The Labgear PSUFC is a new ultra compact in-line power supply for masthead amplifiers and remote line powered distribution amplifiers. This 12V DC 3mA psu can be used to power any masthead amplifier, or a number of masthead amplifiers in cascade, or other line powered amplifiers providing the total current demand is not more than 300mA. Ideally fixed to a wall, skirting board, mounting board or similar hard surface a ventilation gap of at least 25mm is advised around the front and sides of the unit.

It complies with the ErP directive so when there is no load it uses only 0.3W. Connections are made using Type-F connectors (male). The PSUFC has a green LED power indicator and features automatic short circuit and overload protections and will cut out automatically when either is detected. Reset is automatic when the problem is solved.

 

  • Regulated power supply ideal for powering any masthead amplifier, or multiple masthead amplifiers in cascade
  • 12VDC - Voltage tolerance 5% - Current 300mA max
  • Complies with ErP (Energy Related Products) Directive. When there is no load the power uses is less than 0.3W
  • Connection to the PSUFC is made with F Connectors (Male)
  • Short Circuit Protection

Additional Info

Additional Info

MPN PSUFC
Manufacturer Labgear
What You Get
Warranty 1 Year Standard Warranty (1 Month UK Carriage, 1 Year Parts, 1 Year Labour)

Reviews

Customer Reviews (1)

Quick and easy to setup and installReview by Mr Roy Watson
Quick and easy to setup and install (Posted on 15/03/2017)

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Specification

Brand - Labgear
Model - PSUFC
DC Output - 12V DC - Voltage tolerance 5% - Current 300mA Max
Connector type - Type-F (female) IEC60169-24
Signal Frequency Range - 5...1000MHz
Signal insertion loss - 0.5Db
Power requirement under load - 230V~50Hz max. 5W
Power requirement under no load - 230V~50Hz < 0.3W
Power Indicator - Green LED
Operating Temperature - 0...40 degrees celsius
Dimensions - (L)60.5 x (W)35.5 x (H)24.74mm

 

Contents

1 x Labgear PSUFC - In Line 12V 300mA Power Supply
1 x Information Sheet

Downloads

You may also be interested in the following product(s)