GB100 CCTV BNC Single Ground Loop Isolator

MaxxOne Ground Loop Isolators reduce "ground loop interference" with CCTV video signals. They have BNC male to BNC female connectors and mini 18cm cables on both sides. They're passive so require no power. They cure video-signal distortion caused by video ground loops and electromagnetic interference. The simple and cheap solution to eliminate picture tearing, cross-talk and rolling.
SKU: M1-BNC-GB100
Only 3 left

Availability: In stock

£9.98
MaxxOne

Same day dispatch available if ordered before 2pm.

Call us now for more info about our products.

Straightforward return and warranty policy

Free mainland UK shipping for orders over £10

 

Description

Details

MaxxOne ground loop isolators reduce ground loop interference with CCTV video signals. They're used where a CCTV video signal is transmitted between two points with a difference in ground potential. Differences in ground potentials are typically caused by unbalanced power line loads. Ground loop interference is caused by electromagnetic interference (EMI). When there's a large difference in ground potentials between two points, EMI may occur and the peak-to-peak magnitude may vary from zero volts to more than ten volts. Ground Loop Isolators help prevent EMI. They reduce the interference between the camera and the DVR by producing equal and opposite magnetic fields that cancel one another.

MaxxOne ground loop isolators have built-in wave rejection, TVS (transient voltage suppressors) for surge protection, interference rejection and noise filters. These devices will prevent "ghosting" in the video feed by absorbing and eliminating the reflected video ghost signal. They also restore the characteristic impedance of the downstream video signal to prevent secondary ghosting in the image.

Installing these devices on every installation and on every camera, even where no ground loops exist will improve the picture quality. It will also future proof the installation against unpredicted distortion problems and interference issues, saving you the hassle of having to return to the camera to fit one.

Features

  • BNC male to BNC female connectors
  • Mini 18cm cables on both sides
  • Passive - No power required
  • Cures video-signal distortion caused by video ground loops
  • Eliminates picture tearing, cross-talk and rolling
  • Prevents interference from other 3rd party power cables
  • Built in video filter for use with DVR's for added interference rejection
  • Built in TVS (Transient Voltage Suppressors) for surge protection

Additional Info

Additional Info

MPN M1-BNC-GB100
Manufacturer MaxxOne
What You Get
  • 1 x BNC Ground Loop Isolator
Warranty 1 Year Standard Warranty (1 Month UK Carriage, 1 Year Parts, 1 Year Labour)
Pack Quantity 1

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Specification

Model No. - GB100
Insertion Loss - 0.5dB
Frequency Response - 0-3dB at 10Mhz
Input Resistance - 75 Ohm
Output Resistance - 75 Ohm
Isolation Voltage - 600VDC (Min)
Insulation Resistance - 100m Ohm
Transient Voltage Suppressor - 12 Vrms
Dimensions - 72 x 28 x 21mm
Material - ABS Plastic
Colour - Black

Downloads